Fire protection clothing: what are the preventive measures of fire protection clothing?
Release time:
2022-09-23
Fire protection clothing, also known as fire protection clothing, protective clothing, fire uniform, etc., is the protective clothing worn by firefighters and high temperature operators. Protection. Firefighters are more than just a protective role. Its use requires attention. So fire protection clothing: what are the preventive measures of fire protection clothing?
Fire fighting clothing: What are the precautions for fire protection clothing?
Fire protection clothing, also known as fire protection clothing, protective clothing, fire uniform, etc., is the protective clothing worn by firefighters and high temperature operators. Protection. Firefighters are more than just a protective role. Its use requires attention. So fire protection clothing: what are the preventive measures of fire protection clothing?
Fire fighting clothing: What are the precautions for fire protection clothing?
1. Remove the fire service from the box.
2. Carefully unload the packaging, start the fire service, and check that it is intact.
3. Open the zipper on the back of the fire station.
4. First put your legs into the connected fireproof state, then stretch your arms and put them on the hood.
5. Zipper, snap.
6. Put on safety boots and adjust the laces according to your needs.
7. Be sure that the legs of the trousers completely cover the boots of the safety boots.
8. Wear gloves so that you can wear a complete set of fire clothing and parts.
9. Cancel fire service in reverse order.
Fire fighting clothing: What is the maintenance method of fire protection clothing?
1. After each use, check the condition of the fire service and focus on whether there is wear and tear.
2. If you want to remove the residual dirt of the fire department, please use tap water and neutral soap, and use detergent if necessary. Use detergent only on contaminated parts. surface.
3. If the fire service has been in contact with chemicals or there are bubbles, the entire aluminum plate surface should be cleaned. If there is oil or oil residue in the fire department, the soap should be cleaned.
4. The fire must be completely dry before re-storage. Do not fold it if it is dry.
5. If the surface of the fire is not very serious burning marks or wear, you can repair the aluminum spray gun. If the exterior of the fire department is damaged, replace the fire department.
6. Firefighters who avoid firemen are protective clothing worn in dangerous places, such as rescue, rescue valuable materials and close the air valve, such as rescue personnel, rescue valuable materials, and close the flame area in a short time. When a fireman is a fireman, if they are for a long period of time, they must be protected by water guns and water cannons. No matter how good it is to avoid fire, it can burn in flames for a long time.
7. Avoid the fire service to verify its integrity and damage before use.
8. It is strictly prohibited to avoid the use of fire services in places with chemical and radiological damage.
9. Avoidance of fire clothing must wear air breathing apparatus and communication equipment to ensure the user's normal breathing at high temperatures and in contact with the commander.
10. After use, you can use cotton yarn to clean the surface dirt and smoke. Other dirt can be brushed with a soft brush immersed in a neutral detergent and rinsed with water. In ventilation, preparation for use is naturally dry.
11. Avoid fire clothing should be stored in dry ventilation and chemical pollution, and regularly checked to prevent mold.
Key words:
Fire fighting clothing
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province