Guidance on the maintenance method of heat insulation clothing
Release time:
2022-12-07
Although heat insulation clothing has good flame retardant properties, it is impossible to maintain people under all conditions. When working near the flame zone, it is necessary to wear a respirator. It is necessary to prevent the use of clothing and direct contact with flame and molten metal as far as possible. Corresponding accessories must be equipped when used under the conditions of chemical and radioactive damage.
Although heat insulation clothing has good flame retardant properties, it is impossible to maintain people under all conditions. When working near the flame zone, it is necessary to wear a respirator. It is necessary to prevent the use of clothing and direct contact with flame and molten metal as far as possible. Corresponding accessories must be equipped when used under the conditions of chemical and radioactive damage.
Thermal insulation clothing should be carefully checked for damage before use. When entering the operation site, the equipment must be finished and fully dressed. To fasten all the blocked parts, to ensure that the clothing is well sealed. The head cover entering the operation site can maintain the original steel helmet together at the same time. It is not necessary to take off the steel helmet during use. The fixing belts at both ends of the head cover are hung on the triangular ring of the head cover surface through two armpits during use.
After use, use a brush dipped in neutral detergent liquid, scrub the surface of the residual dirt, and then rinse with clean water, it is strictly prohibited to soak and beat with water. Complete sets of heat insulation clothing must adhere to the boring storage bag, ready to use at any time. Attention to heat insulation clothing: high temperature insulation clothing has excellent high temperature insulation performance.
But not in all conditions can play the role of maintenance, can not be in direct contact with the flame! Before use, carefully check whether there is any damage, if any, it is strictly prohibited for operation! Maintenance: after use, use a soft brush dipped in neutral detergent liquid, scrub the surface of residual dirt, no water immersion and hammering. After washing should be hung in a ventilated natural boring.
Key words:
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province