Fire insulation clothing supplier: Introduction to the knowledge and information of fire insulation clothing
Release time:
2021-10-11
Fire insulation clothing is made of polypropylene fiber fabric and aluminum foil composite material, which does not contain asbestos. Compared with domestic similar products, it has the advantages of light weight, high temperature resistance, heat insulation, fire prevention, high strength, wear resistance, folding resistance, softness, non-toxic and harmless to human body. It can effectively protect the personal safety of firefighters in fire fighting operations.
Fire insulation clothing is made of polypropylene fiber fabric and aluminum foil composite material, which does not contain asbestos. Compared with domestic similar products, it has the advantages of light weight, high temperature resistance, heat insulation, fire prevention, high strength, wear resistance, folding resistance, softness, non-toxic and harmless to human body. It can effectively protect the personal safety of firefighters in fire fighting operations.
Fire insulation clothing is a kind of fire fighting equipment. Mainly used for working in high temperature environment. It protects the user's body from high temperatures (extreme heat, flame, steam) by delaying heat conduction, so it is widely used in fire fighting and high temperature operating environments. So as such an important fire equipment, fire insulation clothing in daily use should be how to maintain it?
Proper maintenance of fire insulation clothing, we must first understand the classification of insulation clothing. Generally speaking, thermal insulation clothing is divided into heavy A- level thermal insulation clothing and light B- level thermal insulation clothing. NFPA1991 the standard, the latter is similar to the former, but the degree of protection of the skin is weak. Therefore, in the process of maintaining thermal insulation clothing, the following points should be paid attention:
Fire insulation clothing has flame retardant and heat insulation properties, but it cannot prevent all adverse situations. When approaching a high temperature ignition source, direct contact with flame or molten metal should be avoided as much as possible. If there is a chemical gas or radiation injury, corresponding accessories and positive pressure respirators are required.
2. The storage place of heat preservation clothing should be dry and ventilated, away from high temperature sources, open flames and acidic chemical solvents. At the same time, the composite layer is prevented from falling off after being affected with moisture.
3. Before using the heat insulation clothing, check whether the heat insulation clothing is damaged.
4. For the insulating clothes after use, use a soft brush dipped in a neutral detergent to scrub the residual dirt on the surface, then rinse with clean water, and then put the washed insulating clothes in a ventilated place to dry and put them back to the corresponding storage position. Remember not to soak the insulating clothing with water, and do not knock the insulating clothing.
5, in the storage of insulation clothing, try to choose the hanging type, try not to face the insulation clothing, so as to avoid repeated folding damage to clothing, affecting its protective performance.
6, insulation clothing should be regularly checked and maintained, once a week, check whether the aluminum foil is damaged, clean up oil stains.
7. If the fire insulation clothing meets the storage conditions, the warranty period is one year.
To do a good job in the maintenance of thermal insulation clothing, strict and standardized rules and regulations must be formulated and operated according to the system. Therefore, I hope the above sharing of Shanghai Chengge will be helpful to everyone.
Key words:
Heat insulation clothing, fire insulation clothing
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province