Introduce some fire protection clothing use and maintenance methods
Release time:
2021-11-16
Fire protection clothing aluminum foil coated with flame retardant fabric, flame retardant fabric has two kinds: cotton flame retardant twill gauze card and C/N cotton brocade flame retardant cloth. After coated with aluminum foil, it has good flame retardant properties, and the outer aluminum foil layer can also play a good role in preventing heat radiation. High-performance fireproof clothing has the characteristics of fireproof, heat insulation, wear resistance, folding resistance, flame retardant, and radiation heat resistance.
Fire protection clothing aluminum foil coated with flame retardant fabric, flame retardant fabric has two kinds: cotton flame retardant twill gauze card and C/N cotton brocade flame retardant cloth. After coated with aluminum foil, it has good flame retardant properties, and the outer aluminum foil layer can also play a good role in preventing heat radiation. High-performance fireproof clothing has the characteristics of fireproof, heat insulation, wear resistance, folding resistance, flame retardant, and radiation heat resistance.
Anti-radiation heating temperature up to 1000 ℃. Fire-fighting fire-fighting clothing is suitable for fire-fighting, chemical, petroleum, electric power, steel, machinery, food, electronics, mining and other industries. It is a protective clothing worn by firefighters and high-temperature workers when working near a fire. Fire protection clothing maintenance and maintenance methods: after taking off the fire protection clothing after each use, check the condition of the fire protection clothing, focusing on checking whether there is wear.
If you want to remove the dirt left on the fireproof clothing, you can use tap water and neutral soap, and if necessary, you can use detergent. Use cleaning agent only on contaminated parts. Be careful, because the cleaning agent may damage the aluminized surface of the protective clothing. If the fire-fighting clothing is found to be in contact with chemicals or have bubbles, the entire aluminized surface should be cleaned. If oil or grease remains in the fire protection clothing, wash it with neutral soap.
Fire protection clothing must be thoroughly dried before re-storage and dry like chemical protection clothing. Do not fold. If there is a small area of burn marks or wear on the surface of the fireproof clothing, it can be repaired with an aluminized spray gun. If the fire protection clothing is damaged externally, replace the fire protection clothing. The heat insulation screen of fire fighting clothing must be in good condition, the glass position is correct, the gilded surface must be clean, and there must be no scratches affecting the line of sight. If the user believes that the glass window is in poor condition, it should be replaced.
Key words:
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province