Selection, wearing method and maintenance method of fireproof clothing fabric
Release time:
2022-03-04
Fire protection clothing is the protective clothing worn by firefighters and high-temperature workers working near an open fire. Used for thermal insulation of upper and lower torso, head, hands, and feet, including fireproof jackets, fireproof pants, fireproof hoods, fireproof gloves, and fireproof foot covers. It has the characteristics of fire prevention, heat insulation, wear resistance, folding resistance, flame retardant and radiation heat resistance. Anti-radiation heating temperature up to 1000 ℃.
Fireproof clothingIt is a protective clothing worn by firefighters and high-temperature workers working near open fires. Used for thermal insulation of upper and lower torso, head, hands, and feet, including fireproof jackets, fireproof pants, fireproof hoods, fireproof gloves, and fireproof foot covers. It has the characteristics of fire prevention, heat insulation, wear resistance, folding resistance, flame retardant and radiation heat resistance. Anti-radiation heating temperature up to 1000 ℃.
The fireproof clothing is made of asbestos-free flame retardant fiber fabric and vacuum aluminized film composite. It has the advantages of light specific gravity, high strength, flame retardant, high temperature resistance, radiation resistance, waterproof, wear resistance, folding resistance, and harmless to the human body., And can effectively protect firefighters and workers in high temperature places from high temperature, flame and steam burns.
Fireproof clothing is composed of multi-layer fabrics such as outer layer, heat insulation layer and comfort layer. This combination of materials can be made as a single layer or multiple layers. The outer layer of heat insulation clothing shall be made of metal aluminum foil surface material that can reflect radiant heat, and can meet the basic clothing manufacturing process requirements and the performance requirements of the corresponding standard accessories.
Selection of 1. Fireproof Clothing Fabrics
Fire resistant clothing requires a flame retardant fabric coated with aluminum foil. There are two main types of flame retardant fabrics: cotton flame retardant twill gauze card and C/N cotton brocade flame retardant cloth. After coated with aluminum foil, the flame retardant performance is good, and the outer aluminum foil layer can also play a good role in preventing heat radiation.
2.Fireproof clothingThe wearing method
1. Take out the fireproof clothing from the packing box.
2. Carefully unload the package, unfold the fireproof clothing, and check whether it is in good condition.
3. Open the zipper of the fireproof clothing.
4. Put the legs into the one-piece fire suit first, then the arms, and finally put on the hood.
5. Zip up and press the button.
6. Put on safety shoes and adjust the laces as needed.
7. It is necessary to make sure that the trouser leg completely covers the boot of the safety boot.
8. Finally, wear gloves so that you can put on a full set of fire clothing and components.
9. Take off the fire suit in reverse order.
3.Fireproof clothingMaintenance method
1. After each take off, check the condition of the fire suit, especially for wear.
2. If you want to remove the dirt left on the fireproof clothing, use tap water and neutral soap, and use detergent if necessary. Use cleaners only in contaminated areas, so be careful because cleaners can damage the aluminized surface.
3. If fireproof clothing has been exposed to chemicals or bubbles are found, the entire aluminized surface should be cleaned. If there is oil or grease residue on the fireproof clothing, wash it with neutral soap.
4. fire clothing must be dried before re-storage, it is best not to fold after drying.
5. If there is a small area of burn marks or wear on the surface of the fireproof clothing, it can be repaired with an aluminized spray gun. If the fire clothing is damaged externally, the fire clothing should be replaced.
Key words:
Fireproof clothing
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province