Anti-bee clothing manufacturers tell you about the characteristics of fire fighting clothing and the inspection items before wearing chemical clothing.
Release time:
2022-06-02
1. Heat resistance: The fire can rise to 600 degrees in a few minutes. Even in a room with direct fire, the temperature is about 300 degrees. The heat generated by plastic melting may also be fatal. Fire-fighting clothing is mainly used for high-temperature operations. It is necessary to maintain its physical properties at high temperatures without brittle carbonization, shrinkage and melting.
Anti-Bee ClothingThe manufacturer will tell you about the characteristics of fire fighting clothing and the inspection items before wearing chemical clothing.
Anti-bee clothing manufacturers: to introduce you to the four characteristics of fire clothing
1. Heat resistance:
The fire can rise to 600 degrees in a few minutes. Even in a room with direct fire, the temperature is about 300 degrees. The heat generated by plastic melting can be fatal. Fire fighting clothing is mainly used for high-temperature operations and needs to be at high temperatures. Maintain its physical properties without brittle carbonization, shrinkage and melting.
2. Flame retardant performance:
Flame retardancy means that the fabric is not easy to ignite or burn under special high temperature or flame. When the fabric is on fire, the fire is prevented from spreading. Once the fire source is removed, the fire will be extinguished. In the fire, the place where people's clothes are on fire is often Severe burns occur, so the flame retardancy of fire-resistant clothing is very important. During the use of fire-fighting facilities, the fabric on one side usually encounters fire, for example, in the process of fire fighting overalls and firefighters entering and leaving the fire, to a large extent, the side directly contacts the flame of the fire fighting facilities and rarely contacts the flame, which requires the insulation fabric to be able to withstand the performance of the flame from one side to the other, so the structure of the flame should also be considered.
3. Insulation:
In the actual use of fire-fighting clothing, most users do not directly contact the fire source, but conduct the external heat to the human body in the form of heat radiation and convection, causing harm to the human body. Fire-fighting clothing must have a good ability to slow down and prevent heat transfer, avoid heat damage to the human body, and provide good safety protection for the staff wearing fire-fighting clothing in high-temperature environment, the thermal insulation performance of fireproof clothing is not only related to the thermal conductivity of the fiber material of the fireproof clothing, but also related to the design and fabric of the clothing, and the structure of the material is very important.
4. Comfortable to wear:
In addition to thermal protection, fire protection clothing must also have a certain tensile strength, tear strength and abrasion resistance, dyeing and washing resistance must also have a certain heat transfer capacity, human body heat and sweat evaporation, physiological load is low, in addition, protective clothing should be loose, light, easy to wear, immovable, climbing, jumping, etc., not easy to cause praise, should take measures in the vulnerable parts of the injured, to meet the requirements of coordination and comfort, and improve work efficiency.
Anti-Bee ClothingManufacturer: The necessary inspection before wearing anti-chemical clothing cannot be omitted.
Before use, the following checks must be carried out:
1. Whether gloves and rubber boots are installed correctly.
Whether the clothes are contaminated inside and outside.
3. Whether there are holes and cracks in the fabric and connection parts of the clothing.
4. Whether the operation of the sealing zipper is normal and the sliding state is good.
5. Whether the overpressure exhaust valve is damaged and whether the diaphragm works normally.
6. Whether the windows are damaged and coated with liquid (windows coated with liquid should not be fogged).
7. The whole set of clothing air tightness is good.
The chemical protective clothing of the second-class firemen shall not be in direct contact with the flame and melt. Before use, the clothes must be carefully checked for damage. If there is damage, it is strictly prohibited to use them. When using, attention must be paid to the close cooperation between the hood and the mask. The neck strap and the large white buckle on the chest must be fastened to ensure the tightness of the neck and chest. The belt must be tightened to reduce the bellows effect during exercise.
Anti-Bee ClothingManufacturer: I'll introduce it here today. If you need anti-bee clothing or fire clothing, you can consult our anti-bee clothing manufacturer.
Key words:
Anti-Bee Clothing
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province