Now I 'd like to tell you about the standard of wearing fire-proof clothing and the matters needing attention when using it.
Release time:
2022-06-10
Fire protection clothing is a kind of heavy protective clothing, made of silver reflective material, need to be used with fire gloves, protective hood, air respirator and other equipment accessories, good use of fire protection clothing is not easy, wear fire protection clothing needs cooperation.
Now let me tell you something about wearingFireproof clothingStandards and precautions when using
Introduction to the Standard Wearing Sequence of Fireproof Clothing
Fire protection clothing is a kind of heavy protective clothing, made of silver reflective material, need to be used with fire gloves, protective hood, air respirator and other equipment accessories, good use of fire protection clothing is not easy, wear fire protection clothing needs cooperation.
wearing process of fire clothing:
1. The wearer should wear fireproof pants and shoes first (the partner should help the wearer to stand firm, and then take the safety belt from the lower back to the wearer), and then fasten the safety belt. At this time, the partner connects the fire rope with the safety belt, and the other end is fixed on the pillar.
2. The collaborator holds the shoulder strap of the respirator and puts it on the wearer's back (or the wearer's right leg kneels down, squats down on the left leg, first holds the right shoulder strap at the right elbow, then holds the back frame of the respirator with the left and right hands at the same time, stands up above the head and then lets go). Turn left 90. For the partner, buckle the semicircular buttons on both sides of the chest with the thumb, tighten the straps downward and fasten the belt.
3. The cooperators should assist the wearer to wear the left sleeve of the fireproof clothing first, put the pressure gauge on the outside of the clothing, and then wear the right sleeve.
4. After the collaborator hangs the helmet on the wearer's neck, the wearer immediately puts on the breathing mask. At this time, the collaborator helps the wearer buckle the fireproof clothing from bottom to top (Note: put the hose into the fireproof clothing before buckling).
5. The collaborator gives the fire gloves to the wearer in the order of left and right hands and lets him wear them himself. Then, he puts on the fire cover and buckles it on the wearer. After completion, he immediately gives the taiping axe and battery safety lamp to the wearer, and the program is completed.
Fireproof clothingJust wear it this way, you can practice more in the correct order, and soon you will be able to master how to use them.
Precautions for fire protection of fire fighting clothing
When in use, the gas cylinder valve of the fire suit should be in a fully open state.
If the user suddenly feels discomfort during use, such as increased breathing resistance, difficulty breathing, dizziness and other unknown reasons, he should leave the scene in time, and all personnel present are advised to leave the scene.
If you hear the siren of the residual gas alarm during use, you should leave the site as soon as possible and advise all personnel present to leave the site.
Under low labor intensity, the working time of the cylinder is 60 minutes; under high labor intensity, the working time of the cylinder is 35 minutes.
Through the above explanation, we all have a good understandingFireproof clothingOur knowledge has been further improved. I hope everyone can firmly remember to avoid panic in case of fire. In addition, if you have friends who need to purchase fire protection clothing, you can call our company for consultation.
Key words:
Fireproof clothing
Previous Page
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province