Let's talk about the knowledge of wearing fire clothing
Release time:
2022-06-14
Fire clothing is the rescue and fire fighting clothing needed by firefighters. As the name implies, it has certain fire and heat insulation properties. Many friends who have just started to use fire clothing do not know much about its wearing methods and inspection steps. Let's take a look at it.
Let's talk about wearing.Fireproof clothingthe knowledge
Wearing method and inspection before use of fireproof clothing
Fire clothing is the rescue and fire fighting clothing needed by firefighters. As the name implies, it has certain fire and heat insulation properties. Many friends who have just started to use fire clothing do not know much about its wearing methods and inspection steps. Let's take a look at it.
how to wear fire clothing:
1. The wearer should wear fireproof pants and shoes first (the partner should help the wearer stand firmly, and then take the safety belt from the lower back to the wearer), and then fasten the safety belt. At this time, the partner will connect the fire rope with the safety belt.
2. The collaborator holds the shoulder strap of the respirator and wears it on the wearer's back (or the wearer's right leg kneels down and squats down on the left leg, first hold the right shoulder strap on the right elbow, then hold the back frame of the respirator with the left and right hands at the same time, stand up above the head and then let go), turn left 90 to face the collaborator, buckle the semicircular buttons on both sides of the chest with the thumb, pull down the back belt and fasten belt.
3. The collaborator should assist the wearer to put on the left sleeve of the fireproof clothing first, and put the pressure gauge on the outside of the clothing, and then put on the right sleeve.
4. After the partner hangs the helmet on the wearer's neck, the wearer immediately puts on the breathing mask. At this time, the partner helps the wearer buckle the fire-proof clothing from bottom to top (note: put the hose into the fire-proof clothing before buckling).
5. The collaborator handed the fire gloves to the wearer in the order of left and right hands, and let them wear them themselves. Then, he put on the fire cover and buckle it for the wearer. After completion, he immediately handed the taiping axe and the battery safety lamp to the wearer. After the formalities were completed, he raised his right hand and walked correctly, indicating that the whole operation process was completed.
Check before useFireproof clothingThe method:
1. Before wearing this protective clothing, fire clothing can ensure adequate maintenance, do not need to use specific underwear, if the user system increases the level of protection, long-sleeved tops, tights, socks, gloves and hoods.
2. Before using the fireproof clothing, visually inspect the protective clothing to ensure that all equipment is in good condition, clean and undamaged; if the protective clothing is in poor condition (stains, cracks, tears or holes on the aluminized surface), do not use it.
3. The face screen of the heat insulation clothing must be in good condition, the glass position must be correct, the gilded appearance must be clean, and there must be no scratches that affect the line of sight. If the user thinks that the glass window is in poor condition, it should be replaced.
Note:Fireproof clothingIn addition to thermal protection, it must also have good practical performance and wearing comfort, such as a certain tensile strength, tear strength, abrasion resistance, etc., and should also have a certain heat and moisture transfer capacity, which is conducive to human body heat loss and sweat Evaporation, low physiological load.
There is no requirement in the existing specification to wear other protective equipment when wearing thermal protective clothing, but thermal protective clothing is generally used in high temperature environment. It is recommended to wear cooling vest under thermal protective clothing, which can reduce the external temperature of human body to a certain extent and make it more comfortable. Therefore, the wearing method of fire protection and heat insulation clothing and the inspection before use are all.
The editor will explain here. If you have any knowledge you don't understand, you can consult our manufacturer.
Key words:
Fireproof clothing
Previous Page
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province