Maintenance process of fire insulation clothing
Release time:
2022-07-14
Fire insulation clothing can ensure adequate protection without specific underwear. Users can wear long-sleeved tops, tights, socks, gloves and headgear before wearing this protective clothing when the protection level is improved systematically. So, let's take a look at the maintenance process of fire insulation clothing.
Fire insulation clothingAdequate protection can be ensured without specific underwear. Users can wear long-sleeved tops, tights, socks, gloves and headgear before wearing this protective clothing when the protection level is improved systematically. So, let's take a look at the maintenance process of fire insulation clothing.
Before using the fire insulation clothing, visually inspect the protective clothing to ensure that all equipment is in good condition and clean; do not use the protective clothing when it is not in good condition (there are stains, cracks, cracks, and holes on the aluminized surface). Fire insulation clothing panels must be in good condition and the glass must be in the correct position. The gilded surface should be clean and free of scratches that affect the line of sight. When the user judges that the glass window is not in good condition, please replace it. It is convenient to replace the glass panel. From inside the protective clothing, open the fixed mounting strap to the right, remove the damaged panel, and then push in the new panel. Push in the correct position, confirm that it is in the correct position, and fix it with the fixed installation belt.
Therefore, in the maintenance process of fire insulation clothing, the following points need to be paid attention.
1, although the fire insulation clothing has the performance of flame retardant insulation, but can not prevent all adverse situations. Do not come in direct contact with flames or molten metal when approaching a high temperature ignition source. Suitable jewellery and positive pressure breathing apparatus must be provided in the presence of chemical gases or radiation disorders.
2,Fire insulation clothingThe storage shall be dry and ventilated. In addition, keep away from high temperature sources, open flames and acid chemical solvents. At the same time to prevent the composite layer due to moisture and fall off.
3. Before using fire insulation clothing, check whether the insulation clothing is damaged.
4. After use, rinse the surface dirt with a soft brush dipped in a neutral detergent, then rinse with clean water, then place the rinsed heat-insulating clothing in the vent to dry, and then put it back into the corresponding storage place. Please be careful not to use foam for thermal insulation clothing, and do not slap.
5, when storing heat insulation clothing, try to choose hanging, as far as possible is not suitable for heat insulation clothing, do not fold damage clothes many times, affect the protective performance.
6, fire insulation clothing must be regularly checked and maintained. Once a week, clean the aluminum foil without damage or oil.
7. If the fire insulation clothing meets the storage conditions, the warranty period is 1 year.
Do a good jobFire insulation clothingThe maintenance work, must formulate strict and standardized rules and regulations, and according to the system operation.
The above is the fire insulation clothing maintenance process. If you need to know more, you can contact us at any time! Our company has many years of experience, rich experience in the production and processing of fire insulation clothing, and the process is strict and cautious. If you have any questions, you can contact our customer service staff at any time. There will be professionals to answer for you and look forward to your joining at any time.
Key words:
Fire insulation clothing
Previous Page
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province