Precautions for the use of fire insulation clothing
Release time:
2022-07-25
Fire insulation clothing is specially used in emergency situations with fire and free flame. It can meet the protection requirements under specific environment. Fire clothing can be used for work near the flame, and direct contact with the flame can also be well protected, but for safety, it is recommended to use it as much as possible next to the flame. So, here's a look at the use of fire insulation clothing.
Fire insulation clothingSpecially used for emergency situations with fire and free flame. It can meet the protection requirements under specific environment. Fire clothing can be used for work near the flame, and direct contact with the flame can also be well protected, but for safety, it is recommended to use it as much as possible next to the flame. So, here's a look at the use of fire insulation clothing.
Fire insulation clothing has a good protective effect on radiant heat in use, and the specific form of fire insulation clothing can be used with any kind of single bottle or double respirator. Multi-layer insulation materials constitute a good thermal insulation layer, while ensuring its thermal insulation function, air is stored between two adjacent materials to obtain greater thermal insulation. Thus, the fire insulation clothing is too large, will not affect the user's free movement. For example, the available time of fire insulation clothing depends on many factors, so the operation is difficult. It is not possible to determine the environmental conditions, the physical condition of the user, etc., a definite available time.
However, during the usable time of the respirator used, the fire insulation clothing can be used normally.
If a respirator is not used, the only air that can be breathed is the air contained inside the fire insulation suit, so the time that can be used will be drastically reduced.
When the internal temperature of the fire insulation clothing is too high, immediately leave the work area and enter the safe zone, and open the protective clothing to cool down quickly.
FIRE INSULATED GARMENT Before wearing this protective clothing, it is not necessary to use specific underwear to ensure adequate maintenance. When the user system increases the protection level. Wear long-sleeved tops, tights, socks, gloves, and headgear.
It is convenient to replace the glass panel. From inside the suit, open the fixture clamp on the right, remove the damaged panel, and push in the new panel. Push it into the correct position. After confirming that it is in the correct position, fix it with the fixing clamp.
Fire insulation clothingIt is one of the types of heat insulation clothing, and it is an important protection for firefighters to carry out fire fighting work. It not only directly determines the personal safety of firefighters, but also directly determines the actual efficiency of fire fighting and rescue work.
This paper introduces the matters needing attention when using fire insulation clothing.
1. Before using the fire-fighting heat insulation clothing, visually inspect the protective clothing to confirm that all equipment is in good condition and clean and undamaged; the protective clothing is not in good condition (do not use it when there are stains, cracks, cracks, or holes on the aluminized surface.
2, fire insulation clothing panel should be in good condition, and the glass should be located in the correct position. The gilded surface should be clean and free of scratches that affect the line of sight. When the user judges that the glass window is not in good condition, please replace it.
It is convenient to replace the glass panel. From inside the protective clothing, open the fixed mounting strap to the right, remove the damaged panel, and then push in the new panel. Push in the correct position, confirm that it is in the correct position, and fix it with the fixed installation belt.
The safety characteristics of fire insulation clothing are only valid when the device is properly worn, fixed, and in good use.
4, fire insulation clothing storage should be placed in a cool place. The ideal method of storage is to hang vertically on the cabinet. Make sure that no deep folds are formed when storing the firefighting insulation suit in the PVC packaging provided or when folded and stored elsewhere. Otherwise, the aluminized surface may be damaged.
The above introduction isFire insulation clothingPrecautions for use. If you need to know more, you can contact us at any time! Our company has many years of experience and looks forward to your joining at any time.
Key words:
Fire insulation clothing
Previous Page
Previous Page
RELATED INFORMATION
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province