Fire Entry Suit FBH-FQA/WQ
Email:
Model number:
FBH-FQA/WQ
Material:
flame-resistant fabric material, flame -proof, heat insulation layer and waterproof moisture barrier etc
Composition:
Head cover, upper and lower clothing, gloves, fire entry boots(including heat insulation shoes)
Size:
S/M/L/XL
Specification:
Package:
Price:
Standard:
YES
- 产品描述
-
- Material: flame-resistant fabric material, flame -proof, heat insulation layer and waterproof moisture barrier etc
- Composition: Head cover, upper and lower clothing, gloves, fire entry boots(including heat insulation shoes)
- Size: S/M/L/XL
- Standard: YES
Fire Entry Suit meets the requirement of XF634-2015. It is mainly used for protective clothing worn by firefighters when they cross the fire area or enter the fire site for a short time to extinguish the fire and rescue. The garment consists of flame-resistant fabric material, flame -proof, heat insulation layer and waterproof moisture barrier etc. It has good fire resistance and heat insulation performance. The garment can not only be used for the personal protection of firefighters in the fire fighting area, but also for the personal protection of the staff in the high temperature emergency repair of the kiln in the glass, cement, ceramics and other industries.
Performance
Ⅰ、Major performance：
1、flame and heat retardant protection. Can be worn when crossing the flame area for fire fighting and emergency rescue in a short duration.
2、Protect against 1000 degrees flame in a short durationⅡ.Main Technical Data
flame retardation
1.The outer shell can withstand temperature up to 1700℃
flaming spread ≤2s，damaged length ≤20mm，no melting or dripping.
Tensile strength：warp ≥ 500N, weft ≥ 500N.
Tear strength: warp ≥ 32N, weft ≥ 32N.
Heat resistance: Not shrink more than 10%2.thermal barrier
flaming spread ≤2s，damaged length ≤100mm，Not ignite or melt.
Heat resistance: Not shrink more than 10%
3.Comfort layer：
Tensile strength：warp ≥ 300N, weft ≥ 300N.
Heat resistance: Not shrink more than 10%
4.whole performance
Flame and radiant heat protection TPP≥40.0cal/cm²
Seam Tensile strength≥500N
Needle spacing density: 9 stitches /3cm for top stitch and blind stitch, 9 stitches /3cm for cover stitching
Weight: ≤13kg
Product Description
Fire Entry Suit meets the requirement of XF634-2015. It is mainly used for protective clothing worn by firefighters when they cross the fire area or enter the fire site for a short time to extinguish the fire and rescue. The garment consists of flame-resistant fabric material, flame -proof, heat insulation layer and waterproof moisture barrier etc. It has good fire resistance and heat insulation performance. The garment can not only be used for the personal protection of firefighters in the fire fighting area, but also for the personal protection of the staff in the high temperature emergency repair of the kiln in the glass, cement, ceramics and other industries.
Performance
Ⅰ、Major performance：
1、flame and heat retardant protection. Can be worn when crossing the flame area for fire fighting and emergency rescue in a short duration.
2、Protect against 1000 degrees flame in a short duration
Ⅱ.Main Technical Data
flame retardation
1.The outer shell can withstand temperature up to 1700℃
flaming spread ≤2s，damaged length ≤20mm，no melting or dripping.
Tensile strength：warp ≥ 500N, weft ≥ 500N.
Tear strength: warp ≥ 32N, weft ≥ 32N.
Heat resistance: Not shrink more than 10%
2.thermal barrier
flaming spread ≤2s，damaged length ≤100mm，Not ignite or melt.
Heat resistance: Not shrink more than 10%
3.Comfort layer：
Tensile strength：warp ≥ 300N, weft ≥ 300N.
Heat resistance: Not shrink more than 10%
4.whole performance
Flame and radiant heat protection TPP≥40.0cal/cm²
Seam Tensile strength≥500N
Needle spacing density: 9 stitches /3cm for top stitch and blind stitch, 9 stitches /3cm for cover stitching
Weight: ≤13kg
Related Products
INQUIRY IMMEDIATELY
Office address:Room 901, Unit 1, Building 2, Liandong U Valley Qingdao Science & Innovation Center, No.1001 Chongqing Middle Road, Xiangtan Road Subdistrict, Licang District, Qingdao City, Shandong Province, China
Factory Address: Li Xin Community, Chengyang District, Qingdao City, Shandong Province